Various models of Hafix supporting systems

Hafix CLASSIC

Classic1.jpg

It is a classic type of an all-aluminium facade grate. It consists of the following elements - burned fixed and sliding burned anchors, L-shaped profile and Z-shaped profile. Anchors cut by laser are made to order directly at our supplier and manufacturing of the anchoring element, can be made in sizes that range from 80 mm to 200mm (20 mm graduated scale) but it can also be adapted to our customers needs. Burned anchors include a slot for easy assembly, which facilitates and quickens installation time and also allows for alignment to a flat surface. On the basic supporting element (supporting vertical L-profile 50x50x3,) the horizontal Z-profile, which serves as a facade element for hanging up plates, is fixed by the self-tapping TEX screws. This system is the basis for the entire Hafix system.

Technical Data Sheet can be downloaded here.

 

Hafix BASIC

Facade grid Hafix Basic is an all-aluminium grid. It consists of the following elements (fixed and sliding anchoring elements, L-profile, Z-profile). Anchors shaped into L60x40 are divided into fixed ones (DSK, the height of the anchors is 170mm) and sliding ones (DSS, the height of the anchors is 90mm). On the basic supporting element L50x25x3 (leveling using the screw connections onto a fixed anchor) the horizontal Z-profile is fixed by using the self-tapping TEX screws. Z-profile serves as a facade element for hanging plates. Thermal bridge and vibration transfer is eliminated by the EPDM pads under each anchor. Technical data sheet contains the basic solutions. On request we can revise individually the basic solutions according to the customer’s requirements.

Technical Data Sheet can be downloaded here.

 

Hafix EXTEND

extend.jpg

It is a facade system for demanding customers who prefer quality over price. The system consists of sliding anchors, which are adjustable in the range from 140 mm to 230 mm. Anchor consists of three elements (fixed part, sliding part and carriage bolt). On the basic supporting element (supporting vertical L-profile 50x50x3) the horizontal Z-profile, which serves as a facade element for hanging plates, is fixed by using the self-tapping TEX screws.

Technical Data Sheet can be downloaded here.


 

Hafix ALU-WOOD

ALUWOOD.jpg

The facade grid is based on a combination of wood and aluminium. The basic supporting element consists of 40x40 wooden beams, which is attached to the facade using the U-shaped anchors. On the basic supporting element of the system - beam 40x40, the horizontal Z-profile, which serves as a facade element for hanging up the facade boards, is fixed. Technical data sheet contains the basic solutions. On request, we can revise individually the basic solutions according to the customer’s requirements.

Technical Data Sheet can be downloaded here.


 

 

Other products for building and mechanical engineering
Copyright © 2018, WT WINTECH a.s.